This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
Known as "The Remedy for Smoking Stoves and Fireplaces," the Type "C" Chimney Top Draft Inducer is recognized as a solution to the common problem of insufficient draft, poor fuel consumption, and a smoky fireplace. These problems are often caused by exterior draft conditions and down drafts. The Type "C" Chimney Top Draft Inducer is ruggedly built, yet it is pleasingly designed and will not detract from the aesthetic appearance of your home. In addition to its use as a draft-inducing device, it also serves to cap the chimney to guard against blockage by debris, nesting of birds, and access by rodents.
The Type "C" Chimney Top Draft Inducer features a sectionalized heat protective compartment to house the 115-volt, 60-cycle, single-phase fan-cooled motor. The draft inducer is insulated to withstand temperatures up to 1300™ for short periods of time and operates continually at 900™ without overheating the motor windings or bearings.
The standard mode of operation for the Type "C" Chimney Top Draft Inducer is through a manual on/off switch operation. A Type "C" Inducer Speed Control is available for use with the unit to increase or decrease the volume of air flowing through the draft inducer. Since a fireplace exhausts heat from the home, it may be desirable to reduce the speed and lower the volume of heated air through the chimney.
Sizing the Draft Inducer All Type "C" Chimney Top Draft Inducers have an overall diameter of 16" and are 14 3/4" high. Use sizing chart below for masonry fireplace openings. Match appliance outlet for manufactured appliances. Inducer Size Maximum Hearth Opening* Outside Diameter of Intake 6" 3.5 sq. ft. 5 59/64" 8" 7 sq. ft. 7 15/16" 10" 12 sq. ft. 10" 13" 30 sq. ft. 13" *Height x Width ? 144 = Square Foot of Opening
Specifications:
- Material: Stainless Steel
- Dimensions: 16" Diameter x 14 3/4" High
- Intake Dimensions: 10" Diameter
Specifications:- Material: Stainless Steel
- Dimensions: 16" Diameter x 14 3/4" High
- Intake Dimensions: 10" Diameter
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Chimney Caps Diameter 10 Inch Additional Information 
Download Owner's ManualHR-mail-only true Left Overlay Image Made in the USA.png Brand Northline
Known as "The Remedy for Smoking Stoves and Fireplaces," the Type "C" Chimney Top Draft Inducer is recognized as a solution to the common problem of insufficient draft, poor fuel consumption, and a smoky fireplace. These problems are often caused by exterior draft conditions and down drafts. The Type "C" Chimney Top Draft Inducer is ruggedly built, yet it is pleasingly designed and will not detract from the aesthetic appearance of your home. In addition to its use as a draft-inducing device, it also serves to cap the chimney to guard against blockage by debris, nesting of birds, and access by rodents.
The Type "C" Chimney Top Draft Inducer features a sectionalized heat protective compartment to house the 115-volt, 60-cycle, single-phase fan-cooled motor. The draft inducer is insulated to withstand temperatures up to 1300™ for short periods of time and operates continually at 900™ without overheating the motor windings or bearings.
The standard mode of operation for the Type "C" Chimney Top Draft Inducer is through a manual on/off switch operation. A Type "C" Inducer Speed Control is available for use with the unit to increase or decrease the volume of air flowing through the draft inducer. Since a fireplace exhausts heat from the home, it may be desirable to reduce the speed and lower the volume of heated air through the chimney.
| Sizing the Draft Inducer | ||
| All Type "C" Chimney Top Draft Inducers have an overall diameter of 16" and are 14 3/4" high. Use sizing chart below for masonry fireplace openings. Match appliance outlet for manufactured appliances. | ||
| Inducer Size | Maximum Hearth Opening* | Outside Diameter of Intake |
|---|---|---|
| 6" | 3.5 sq. ft. | 5 59/64" |
| 8" | 7 sq. ft. | 7 15/16" |
| 10" | 12 sq. ft. | 10" |
| 13" | 30 sq. ft. | 13" |
|
*Height x Width ? 144 = Square Foot of Opening |
||
Specifications:
- Material: Stainless Steel
- Dimensions: 16" Diameter x 14 3/4" High
- Intake Dimensions: 10" Diameter
Specifications:
- Material: Stainless Steel
- Dimensions: 16" Diameter x 14 3/4" High
- Intake Dimensions: 10" Diameter
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Season | Everyday |
| Product Type | Chimney Caps |
| Diameter | 10 Inch |
| Additional Information | Download Owner's Manual |
| HR-mail-only | true |
| Left Overlay Image | Made in the USA.png |
| Brand | Northline |
