-
Details
New Lock-Top II 13" x 17" Chimney Cap/Damper - This premier energy-saving product is 90% more efficient than a traditional throat damper. With today's skyrocketing energy costs, the dollars saved in heat loss make a cap/damper combination a better choice than a chimney cap alone. The energy savings will quickly pay for the installation.
The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. The base mounts to a sweep's ring which then is connected to the flue tile with a high temp silicone sealant. A 30' stainless steel cable drops down the flue, and a hardware set mounts in the firebox. The end result is a damper that opens and closes with ease at the tug of a drop down cable. The Lock-Top II is equipped with a fire safety device that enables the damper to remain open in case of a chimney fire.
*Top-sealing dampers are not recommended with gas logs- failure to open could cause carbon monoxide to back up into the house.
Specifications:- Measures 13" x 17"
- 3/4" Mesh screen
- 11 3/4" Overall height
- Fits inside flue sizes 9" x 14" to 12 1/2" x 17 1/2"
- Stainless steel and cast aluminum construction
- Silicone sealant, sweep's ring, 30' stainless steel cable included
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Chimney Caps Fits Lengths From 14 Inch Fits Lengths From 16.5 Inch Fits Lengths From 17 Inch Fits Lengths From 17.5 Inch Fits Lengths From 14.5 Inch Fits Lengths From 15 Inch Fits Lengths From 15.5 Inch Fits Lengths From 16 Inch Fits Widths From 10 Inch Fits Widths From 11 Inch Fits Widths From 11.5 Inch Fits Widths From 9 Inch Fits Widths From 9.5 Inch Fits Widths From 12 Inch Fits Widths From 12.5 Inch Fits Widths From 10.5 Inch Mesh 3/4in Mesh Pipe Piece Damper Pipe Piece Chimney Cap Additional Information HR-mail-only true Left Overlay Image Made in the USA.png Brand LockTop
New Lock-Top II 13" x 17" Chimney Cap/Damper - This premier energy-saving product is 90% more efficient than a traditional throat damper. With today's skyrocketing energy costs, the dollars saved in heat loss make a cap/damper combination a better choice than a chimney cap alone. The energy savings will quickly pay for the installation.
The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. The base mounts to a sweep's ring which then is connected to the flue tile with a high temp silicone sealant. A 30' stainless steel cable drops down the flue, and a hardware set mounts in the firebox. The end result is a damper that opens and closes with ease at the tug of a drop down cable. The Lock-Top II is equipped with a fire safety device that enables the damper to remain open in case of a chimney fire.
*Top-sealing dampers are not recommended with gas logs- failure to open could cause carbon monoxide to back up into the house.
Specifications:
- Measures 13" x 17"
- 3/4" Mesh screen
- 11 3/4" Overall height
- Fits inside flue sizes 9" x 14" to 12 1/2" x 17 1/2"
- Stainless steel and cast aluminum construction
- Silicone sealant, sweep's ring, 30' stainless steel cable included
Clearance | Non-Clearance |
---|---|
Country Of Origin | United States |
Season | Everyday |
Product Type | Chimney Caps |
Fits Lengths From | 14 Inch |
Fits Lengths From | 16.5 Inch |
Fits Lengths From | 17 Inch |
Fits Lengths From | 17.5 Inch |
Fits Lengths From | 14.5 Inch |
Fits Lengths From | 15 Inch |
Fits Lengths From | 15.5 Inch |
Fits Lengths From | 16 Inch |
Fits Widths From | 10 Inch |
Fits Widths From | 11 Inch |
Fits Widths From | 11.5 Inch |
Fits Widths From | 9 Inch |
Fits Widths From | 9.5 Inch |
Fits Widths From | 12 Inch |
Fits Widths From | 12.5 Inch |
Fits Widths From | 10.5 Inch |
Mesh | 3/4in Mesh |
Pipe Piece | Damper |
Pipe Piece | Chimney Cap |
Additional Information | |
HR-mail-only | true |
Left Overlay Image | Made in the USA.png |
Brand | LockTop |