18-Inch to 30-Inch Peterson Real Fyre Charred American Oak Vented Gas Log Set

Like an artist who can bring the beauty of nature to life, Real-Fyre artisans work from real wood samples to meticulously recreate the intricate bark detail and natural coloration of deeply charred wood. The 18-Inch to 30-Inch Peterson Real Fyre Charred American Oak Vented Gas Log Set is a beautiful manifestation, given life with fantastic hand-carved and painted barks to showcase a charred effect and amplified with golden highlights featuring the natural look of the oakwood grain. This log set is combined with a burner kit to set forth soothing warmth and decorative accent in any styled interior structures.

The burner includes a custom log grate, glowing embers, silica sand, a bendable connector kit with brass fittings for a half-inch line, grate clamps, a damper clamp, and installation instructions.

• Flexible installation options
• Minimal installation is required
• Installation for heat or ambiance
• No mess, require little maintenance
• Realistic logs and flame presentation
• Reinforced ceramic build will last for years
• Clean, convenient and easy fire in seconds
• Enhances aesthetic appeal whether turned on or off

Let's build your log set.

Step 1: Choose a log size
The size of your log set must be appropriate to your fireplace using the following guidelines:

Measure your fireplace taking the front width (A), the rear width (B) and the depth (C).

The log set size you can use in your fireplace should meet the minimum dimensions.

"A" - Minimum 2" to 6" on each side of the nominal set size. In other words, if you are planning to use a 24" log set, the front opening dimension of your fireplace (A) should be at least 28".

"B" - Not less than nominal set size. In other words, if you are planning to use a 24" log set, the rear dimension of your fireplace (B) should be at least 24" wide.

"C" - Minimum 12" to 14" (16" to 18" for see-through fireplaces).

Be careful when measuring a Pre-Fab fireplace, typically you will need a 36" fireplace (A dimension) for a 24" log set.

Step 2: Select a burner
The burner that you chose must match the log size that you had selected. Pick a burner series based on the systems below

PETERSON G4 BURNER:The G4 Glowing Ember Burner System produces an authentic glowing ember bed and dancing flames that cascade throughout the log set to create a real, wood-burning fire. The G4 Glowing Ember Burner features steel construction and is coated with a heat-resistant black paint that gracefully withstands the burner's 90,000 BTU (75,000 for 18-inch to 20-inch) emissions.

• Entry Level Single Pipe Burner
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

PETERSON G45 BURNER:The G45 Triple T-Burner system offers a T-shaped, additional front burner that emphasizes the front ember presentation and puts even more depth to the flame. You will see more glowing embers and a small row of flames in the front with this burner, adding more realism to your fireplace. This burner is compatible with most Real-Fyre log styles and controls.

• Upgraded Double Pipe Burner
• Increased depth of flame and heat
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

Step 3: Choose a valve control
You will need to pick one of the valves listed below to complete your gas log set.

• The Peterson RealFyre Safety Pilot Kit (5RP-SPK26 ) is a remarkable pilot system that offers manual variable flame control. It features a low-profile build and includes a heat shield. The Peterson SPK-26 Safety Pilot System is compatible with most RealFyre vented burners.
• Real Fyre APK-11 Remote On/Off Pilot System (5RP-APK11 ) allows you to handle your system using a remote control, wall switch, or the manual knob on the burner system. This system does not have variable flame height control, making the fire display always presented at the same height. The remote is included.
• The Peterson RealFyre Automatic Variable Flame Pilot Kit (5RP-APK15) permits the adjustment of flame height and heat output with an included remote control

Customers are responsible for checking local codes and regulations prior to purchase.

• Vented
• Reinforced with steel rods
• Durably constructed of ceramic
• Includes G4 Glowing Ember Burner System
• Hand-painted and handcrafted from real wood samples
• 90,000 BTU (75,000 for 18'' - 20'') emissions