18-Inch to 30-Inch Peterson Real Fyre Charred Rugged Split Oak Vented Propane Gas Log Set

The Charred Rugged Split Oak Series from Peterson Real Fyre offers this 18-Inch to 30-Inch Vented Propane Gas Log Set. It is beautifully handcrafted and painted to manifest a lifelike view of natural burning firewood to accentuate any home interior design. This log set shows off a burned-through center log to display the majestic dancing flames from carefully detailed charred split timber. It is a charming focal highlight of your home at any given season.

The Charred Rugged Split Oak Gas Log Set includes a burner kit with a custom log grate, glowing embers, silica sand, a bendable connector kit with brass fittings for a half-inch line, grate clamps, a damper clamp, and installation instructions.

• Flexible installation options
• Minimal installation is required
• Installation for heat or ambiance
• No mess, require little maintenance
• Realistic logs and flame presentation
• Reinforced ceramic build will last for years
• Clean, convenient and easy fire in seconds
• Enhances aesthetic appeal whether turned on or off

Building Your Gas Log Set:

Step 1: Choose a log size
The size of you log set should be appropriate to your fireplace using the following guidelines:

Measure your fireplace taking the front width (A), the rear width (B) and the depth (C).

The size of the log set size should meet your fireplace's minimum dimensions.

"A" - Minimum 2" to 6" on each side of the nominal set size. In other words, if you are planning to use a 24" log set, the front opening dimension of your fireplace (A) should be at least 28".

"B" - Not less than nominal set size. So if you are going to use a 24" log set, the rear dimension of your fireplace (B) should be at least 24" wide.

"C" - Minimum 12" to 14" (16" to 18" for see-through fireplaces).

Be careful when measuring a Pre-Fab fireplace. You will typically need a 36" fireplace (A dimension) for a 24" log set.

Step 2: Select a burner
The burner must match the log size that you had selected. You may select a burner series based on the systems below.

PETERSON G4 BURNER: The G4 Glowing Ember Burner System produces an authentic glowing ember bed and dancing flames that cascade throughout the log set to create a real, burning wood fire. The G4 Glowing Ember Burner features steel construction and is coated with a black heat-resistant paint that holds out perfectly against the burner's 65,000 BTU (50,000 for 18'' - 20'') emissions.

• Entry Level Single Pipe Burner
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

PETERSON G45 BURNER: The G45 Triple T-Burner system offers a T-shaped, extra front burner that highlights the front ember presentation and puts more depth to the flame. You will see more glowing embers and a small row of flames in the front with this burner, amplifying more realism for your fireplace. This burner is compatible with most Real-Fyre log styles and controls.

• Upgraded Double Pipe Burner
• Increased depth of flame and heat
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

Step 3: Choose a valve control
You need to choose one of the valves listed below to complete your gas log set.

• The Peterson RealFyre Safety Pilot Kit (5RP-SPK26) is a standing pilot system that offers manual variable flame control. It features a low-profile build and includes a heat shield. The Peterson SPK-26 Safety Pilot System is compatible with most RealFyre vented burners.
• Real Fyre APK-11 Remote On/Off Pilot System (5RP-APK11) handles your system using a remote control, wall switch, or the manual knob on the burner system. This system does not have variable flame height control, making the flame always at the same height. The remote is included.
• The Peterson RealFyre Automatic Variable Flame Pilot Kit (5RP-APK15) has an adjustable flame height and heat output using a remote control included in the kit

Customers are responsible for checking local codes and regulations prior to purchase.

California Prop 65 Notice - WARNING: This product can expose you to carbon monoxide, known to the State of California to cause birth deficiencies or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov

• Vented
• Measures 30"
• Reinforced with steel rods
• Durably constructed of ceramic
• Includes G4 Glowing Ember Burner System
• Hand-painted and handcrafted from real wood samples
• 65,000 BTU (50,000 for 18'' - 20'') emissions