18-Inch to 30-Inch Peterson Real Fyre Rustic Oak Vented Propane Gas Log Set

The 18-Inch to 30-Inch Peterson Real Fyre Rustic Oak Vented Propane Gas Log Set is a remarkable heating appliance that provides both comfort and elegance. The Rustic Oak Gas Log Set and Glowing Ember Burner System is a terrific combination that allows low maintenance and a mess-free indoor fireplace. This burner kit comes complete with a custom log grate, glowing embers, silica sand, a bendable connector kit with brass fittings for a half-inch line, grate clamps, a damper clamp, and installation instructions.

Install Your Gas Log Set

Step 1: Choose a log size
The size of your log set should be appropriate to your fireplace. Measure your fireplace by taking the front width (A), the rear width (B) and the depth (C).The log set size should meet the fireplace's minimum dimensions.

"A" - Minimum 2" to 6" on each side of the nominal set size. In other words, if you are planning to use a 24" log set, the front opening dimension of your fireplace (A) should be at least 28".

"B" - Not less than nominal set size. So if you are going to use a 24" log set, the rear dimension of your fireplace (B) should be at least 24" wide.

"C" - Minimum 12" to 14" (16" to 18" for see-through fireplaces).

Be careful when measuring a Pre-Fab fireplace. You will typically need a 36" fireplace (A dimension) for a 24" log set.

Step 2: Select a burner
The burner must match the log size that you had selected.

PETERSON G4 BURNER: Produces an authentic glowing ember bed and dancing flames that cascade throughout the log set to create a real, wood-burning fire experience. The G4 Glowing Ember Burner features steel construction and has a black-coated heat-resistant paint that can stand the burner's 65,000 BTU (50,000 for 18'' - 20'') emissions.

• Entry Level Single Pipe Burner
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

PETERSON G45 BURNER: T-shaped, extra front burner highlighting the front ember presentation and gives more depth to the flame. You will see more glowing embers and a small row of flames in the front with this burner, adding more realism for your fireplace. This burner is compatible with most Real-Fyre log styles and controls.

• Upgraded Double Pipe Burner
• Increased depth of flame and heat
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

Step 3: Choose a valve control

• The Peterson RealFyre Safety Pilot Kit (5RP-SPK26 ) is a standing pilot system that offers manual variable flame control. It features a low-profile build and includes a heat shield. The Peterson SPK-26 Safety Pilot System is compatible with most RealFyre vented burners.
• Real Fyre APK-11 Remote On/Off Pilot System (5RP-APK11) manages your system using a remote control, wall switch, or the manual knob on the burner system. This system does not have variable flame height control, displaying the flame always at the same height. The remote is included.
• The Peterson RealFyre Automatic Variable Flame Pilot Kit (5RP-APK15) has an adjustable flame height and heat output with an included remote control.

• Vented
• Measures 30"
• Reinforced with steel rods
• Durably constructed of ceramic
• Includes G4 Glowing Ember Burner System
• Hand-painted and handcrafted from real wood samples
• 65,000 BTU (50,000 for 18'' - 20'') emissions