18-Inch to 30-Inch Peterson Real Fyre Charred Split Oak Vented Gas Log Set

The Peterson Real Fyre Gas Logs give you what a fire is meant to be. The 18-Inch to 30-Inch Peterson Real Fyre Charred Split Oak Vented Gas Log Set is an incomparable heating appliance to share warmth and the beauty of a fire. It offers a high-performing product without the worry of hauling, soot, and ashes. This log set is well-crafted and painted by hand to replicate the natural looks of an actual wood sample. It displays carefully detailed, deeply charred bark edges to recreate the burning appearance of firewood.

The Charred Split Oak Gas Log Set and Burner Kit is a perfect combination to show off this fireplace's natural, modern, and mesmerizing glow to accentuate every home interior. The burner kit comes complete with a custom log grate, glowing embers, silica sand, a bendable connector kit with brass fittings for a half-inch line, grate clamps, a damper clamp, and installation instructions.

California Prop 65 Notice - WARNING: This product can expose you to carbon monoxide, known to the State of California to cause birth problems or other reproductive issues. For more information go to http://www.P65Warnings.ca.gov

• Flexible installation options
• Minimal installation is required
• Installation for heat or ambiance
• No mess, require little maintenance
• Realistic logs and flame presentation
• Reinforced ceramic build will last for years
• Clean, convenient and easy fire in seconds
• Enhances aesthetic appeal whether turned on or off

How to Build Your Gas Log Set:

Step 1: Choose a log size
The size of your log set should be suitable to your fireplace using the following guidelines:

Measure your fireplace taking the front width (A), the rear width (B) and the depth (C).

The size of the log set should meet your fireplace's minimum dimensions.

"A" - Minimum 2" to 6" on each side of the nominal set size. In other words, if you are planning to use a 24" log set, the front opening dimension of your fireplace (A) should be at least 28".

"B" - Not less than nominal set size. So if you are going to use a 24" log set, the rear dimension of your fireplace (B) should be at least 24" wide.

"C" - Minimum 12" to 14" (16" to 18" for see-through fireplaces).

Be careful when measuring a Pre-Fab fireplace. You will typically need a 36" fireplace (A dimension) for a 24" log set.

Step 2: Select a burner
The burner must match the log size that you had selected. Choose a burner series based on the systems below.

PETERSON G4 BURNER: The G4 Glowing Ember Burner System produces an authentic glowing ember bed and dancing flames, streaming throughout the log set to create a real wood-burning fire presentation. The G4 Glowing Ember Burner features steel construction and has a black heat-resistant paint coating that withstands the burner's 90,000 BTU (75,000 for 18'' - 20'') emissions.

• Entry Level Single Pipe Burner
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

PETERSON G45 BURNER: The G45 Triple T-Burner system offers a T-shaped, supplementary front burner that highlights the front ember presentation and puts more depth to the flame. You will see more glowing embers and a small row of flames in the front with this burner, creating more realism for your fireplace. This burner is compatible with most Real-Fyre log styles and controls.

• Upgraded Double Pipe Burner
• Increased depth of flame and heat
• Produces a glowing "hot coal" look
• Separate control valve to be connected at installation

Step 3: Choose a valve control
You will need to choose one of the valves listed below to complete your gas log set.

• The Peterson RealFyre Safety Pilot Kit (5RP-SPK26) is a standing pilot system that offers manual variable flame control. It features a low profile build and includes a heat shield. The Peterson SPK-26 Safety Pilot System is compatible with most RealFyre vented burners.
• Real Fyre APK-11 Remote On/Off Pilot System (5RP-APK11) handles your system using a remote control, wall switch, or the manual knob on the burner system. This system does not have variable flame height control, always exhibiting the flame at the same height. The remote is included.
• The Peterson RealFyre Automatic Variable Flame Pilot Kit (5RP-APK15) has a versatile flame height and heat output with an included remote control.

It is the responsibility of the customers to check local codes and regulations before purchasing this product.

• Vented
• Reinforced with steel rods
• Durably constructed of ceramic
• Includes G4 Glowing Ember Burner System
• Hand-painted and handcrafted from real wood samples
• 90,000 BTU (75,000 for 18'' - 20'') emissions