This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
Selkirk VP Pellet Pipe Adaptor Tee with Cap with its unique snout is intended to connect directly to 3" VP appliance outlet via adjustable hose clamp, while the Tee section connects to standard VP Pipe. This part replaces the need for a PC when using a tee on VP installations. The 4VP-3AT also has an extended inner snout and a removable outer snout to allow trimming for installations where reduced clearance is desired / allowed. Can be used in vertical and horizontal installations and features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of 304 stainless steel inner wall and paintable galvanized outer wall. Internal spacing bead assures uniform insulating air space between pipe walls, and allows for 3" clearance to combustable materials. Male end is rolled over eliminating sharp edges.
VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).
See all 4" VP Pellet Pipe Components
Additional Information:
Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.
Specifications:- Dimensions: 3'' dia. snout x 4" dia. body
- Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
- Clearance: 3" to Combustible Material
- Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641
-
Additional Information
Clearance Non-Clearance Country Of Origin Mexico Season Everyday Product Type Chimney Pipe Diameter 4 Inch Pipe Piece Tee Pipe Wall Double Wall Type Pellet Vent Pipe Brand Selkirk VP
Selkirk VP Pellet Pipe Adaptor Tee with Cap with its unique snout is intended to connect directly to 3" VP appliance outlet via adjustable hose clamp, while the Tee section connects to standard VP Pipe. This part replaces the need for a PC when using a tee on VP installations. The 4VP-3AT also has an extended inner snout and a removable outer snout to allow trimming for installations where reduced clearance is desired / allowed. Can be used in vertical and horizontal installations and features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3" and 4" diameters constructed of 304 stainless steel inner wall and paintable galvanized outer wall. Internal spacing bead assures uniform insulating air space between pipe walls, and allows for 3" clearance to combustable materials. Male end is rolled over eliminating sharp edges.
VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).
See all 4" VP Pellet Pipe Components
Additional Information:
Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570°F.
Specifications:
- Dimensions: 3'' dia. snout x 4" dia. body
- Construction Materials: 304 Stainless Steel Inner Wall, Paintable Galvanized Outer Wall
- Clearance: 3" to Combustible Material
- Listings: UL 103, ULC S609, ULC/ORD C441 and UL 641
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | Mexico |
| Season | Everyday |
| Product Type | Chimney Pipe |
| Diameter | 4 Inch |
| Pipe Piece | Tee |
| Pipe Wall | Double Wall |
| Type | Pellet Vent Pipe |
| Brand | Selkirk VP |
