This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
The Dryer Vent Kit is ideal for venting electric and gas clothes dryers. The plastic components contain "UV Stabilizer" to reduce fading, due to exposure to sunlight. The flexible ducting is heat and flame resistant. This venting system should be installed as close to the dryer as possible and must vent the heat to the outdoors. The kit includes: (1) 4" louvered vent hood, (1) length of aluminized flexible ducting, (1) 4" plastic collar and (2) 4" plastic clamps.
Additional Information:
Easy to Install Instructions- Determine desired location to install The dryer vent kit. Cut a hole through the outside wall measuring 4 1/4" in diameter.
- Remove the plastic collar from the tail pipe. From the outside wall, fully insert tail pipe into the hole until the louvered vent hood lays flat against the outside wall. Make sure louvers open from the bottom.
- Secure louvered vent hood to wall using screws. (not included)
- Slide plastic collar over tail pipe against inside wall.
- Slide one end of aluminized flexible ducting over dryer outlet and secure with plastic clamp.
- With dryer in perminent location, determine shortest length of aluminized flexible ducting necessary to reach the dryer outlet and cut off excess amount.
- Slide remaining length of aluminized flexible ducting over dryer outlet and secure with a plastic clamp.
- The dryer vent kit may also be installed in a window opening. Follow steps 5-7.
Specifications:- Louvered Vent Hood measures: 5 7/8" Wide x 5 7/8" High x 11 1/2" Deep
- 8' flexible aluminized ducting
- Made to fit a 4" vent hole
-
Additional Information
Country Of Origin Canada Season Everyday Product Type Chimney Pipe Diameter 4 Inch Pipe Piece Dryer Vent Kit Product Type Dryer Vent Pipe Type Dryer Vent Pipe Clearance Non-Clearance Lowest Bulk Price 26.24 Brand IMG
The Dryer Vent Kit is ideal for venting electric and gas clothes dryers. The plastic components contain "UV Stabilizer" to reduce fading, due to exposure to sunlight. The flexible ducting is heat and flame resistant. This venting system should be installed as close to the dryer as possible and must vent the heat to the outdoors. The kit includes: (1) 4" louvered vent hood, (1) length of aluminized flexible ducting, (1) 4" plastic collar and (2) 4" plastic clamps.
Specifications:
Additional Information:
Easy to Install Instructions- Determine desired location to install The dryer vent kit. Cut a hole through the outside wall measuring 4 1/4" in diameter.
- Remove the plastic collar from the tail pipe. From the outside wall, fully insert tail pipe into the hole until the louvered vent hood lays flat against the outside wall. Make sure louvers open from the bottom.
- Secure louvered vent hood to wall using screws. (not included)
- Slide plastic collar over tail pipe against inside wall.
- Slide one end of aluminized flexible ducting over dryer outlet and secure with plastic clamp.
- With dryer in perminent location, determine shortest length of aluminized flexible ducting necessary to reach the dryer outlet and cut off excess amount.
- Slide remaining length of aluminized flexible ducting over dryer outlet and secure with a plastic clamp.
- The dryer vent kit may also be installed in a window opening. Follow steps 5-7.
Specifications:
- Louvered Vent Hood measures: 5 7/8" Wide x 5 7/8" High x 11 1/2" Deep
- 8' flexible aluminized ducting
- Made to fit a 4" vent hole
| Country Of Origin | Canada |
|---|---|
| Season | Everyday |
| Product Type | Chimney Pipe |
| Diameter | 4 Inch |
| Pipe Piece | Dryer Vent Kit |
| Product Type | Dryer Vent Pipe |
| Type | Dryer Vent Pipe |
| Clearance | Non-Clearance |
| Lowest Bulk Price | 26.24 |
| Brand | IMG |
