6" DuraTech 7/12 - 12/12 Metal Roof Flashing - 6DT-F12DSA

Roof Flashing is used to weather proof the penetration of chimney pip through the roof. A storm collar is required (not included). The DSA Flashing is designed for metal or tile roofs and is made from dead soft aluminum.

DuraTech is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas, and zero-clearance fireplaces that are factory-built.

See all 6" DuraTech Chimney Pipe.

Additional Information:

With a Thermal Tech blanket insulation encased between duel walls, DuraTech offers superior safety and performance. It keeps the outer wall cool while ensuring high flue gas temperatures for optimum draft performance. The inner wall is 25% thicker than competitive chimneys, for an extra margin of safety. Designed for normal, continuous operation at 1000°F flue gas temperatures, DuraTech is subjected to rigorous and stringent HT requirements of the UL standard, including one hour at 1400°F, plus three ten minute chimney fire tests at 2100°F.

  Chimney Installation Instructions

  Shroud Installation Instructions

WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harmFor more information go to http://www.P65Warnings.ca.gov.
Specifications:

• Diameter: 6"
• Construction Materials: Dead soft aluminum
• Clearances: 2" to combustibles
• Listings: c-UL-us Listed to UL 103 and ULC S604 (MH7399)
• Designed for 7/12-12/12 metal or tile roofs