6" x 60" DuraTech Stainless Steel Chimney Pipe - 6DT-60SSCF

6 inch by 60 inch DuraTech Stainless Steel Chimney Pipe is for Indoor and Outdoor use but is required when transitioning from Interior to Exterior

DuraTech Stainless Steel Chimney Pipe is a double wall insulated Class A all fuel chimney vent pipe. This five foot section allows you to safely pass through your roof line without the need for multiple sections of pipe and connectors. DuraTech features light weight insulation, twist-lock fittings, support boxes with factory installed starter sections, elbows with 360 degree swivel base, select black finish pipe lengths, and five foot length pipe sections such as this product.

Whenever your vent run goes through its first wall or a ceiling all components from that point on are required to be Class A double or triple wall stainless steel. Galvanized components may be allowed to be used on the interior of the home, but it is always recommended to refer to the appliance manual to determine the proper size and style of venting that is required. We also offer the 6 inch by 60 inch DuraTech Galvanized pipe section as well.

6 inch by 60 inch DuraTech Chimney Pipe can only be used in DuraTech venting systems and cannot be combined with non DuraTech components

Every chimney pipe manufacturer prohibits the mixing of different brands of chimney pipe. For this reason each brand creates a slightly different connection locking system for securing pipe components to each other and if used with a different brand these connections will not be fit properly and will not offer a secure fit.

Using even just 1 component from a different brand will void the manufacturer's warranty on your entire chimney system including the warranty for your heating appliance itself.

Nearly all venting manufacturer's do not label their pipe, so if you do not know what brand of venting you have, this means that most often you have to replace the entire vent system. While this can be a costly expense, it is the safest option. One insecure connection could lead to a chimney fire and this can result in not only property damage but also loss of life for you or a loved one. This is why chimney venting safety is so important.

Why should I choose this 60 inch pipe instead of going with smaller sections of pipe?

It is important to plan out your entire vent run before purchasing any components. We offer a handy Chimney Wizard to help you figure out all the chimney sections and components that you need for your vent project.

It is important to have as few seams as possible in your run. Seams refer to the joints where your venting components join together. There are several advantages and benefits of having fewer seams including:

• Lower risk of Leaks - The fewer seams that you have, the less of a chance of moisture entering your chimney system. If water and moisture enter your chimney it can cause a break down of your chimney liner, added corrosion and the longer it is left untreated the moisture can cause more intense damage over time.
• Better Draft- Seams create turbulence in your venting system and the more seams the more it disrupts the flow of exhaust gases. The more disruptions that you have the more your draft efficiency drops. The better your efficiency the better your system will be at properly venting the combustion byproducts that are released during you fires. The more seams the greater the chance of back draft and the more harm this can cause on your appliance.
• Improved Safety - Every seam is a potential catch point where creosote can accumulate. Creosote is a flammable byproduct of combustion. The longer creosote is left untreated the more chance it has of producing a chimney fire.
• Cleaner Aesthetic - If your chimney system is visible, having fewer seams will give your system a cleaner and more visually appealing look.
• Easier Installation - Fewer seams means fewer components to purchase and to put together. This also means fewer connections and sealing points for your installer.
• Cost Savings - While it may seem like you are saving money by going with shorter sections of pipe, it actually costs you significantly more. If you need to go 5 feet in your venting, you can purchase this 60 inch chimney section and that would be all you need. If you want smaller components, then you will have to purchase 2 - 30 inch chimney sections which will cost more together than purchasing the single component. You can check out all of our DuraTech products and price them out for yourselves.
  

The other thing to keep in mind when considering the components of your vent run is what is approved for use in your area. You and your installer will want to check with local and state codes as well as review the manual for your appliance. The manual will list all of the requirements for the venting system.

Learn more about DuraTech Chimney Pipe and how it compares to DuraPlus Chimney Pipe in our article DuraTech Chimney Pipe FAQ

WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harm. For more information go tohttp://www.P65Warnings.ca.gov.

• Diameter: 6"
• Construction Material: Inner wall of .020" 430 stainless steel, Outer wall .016 430 stainless steel
• Clearance: 2" clearance to combustibles
• Listings: c-UL-us Listed to UL 103 and ULC S604 (MH7399)
• Stainless Steel outer wall required for installation in Canada
• Twist-lock connection