8'' DuraPlus Mobile Home Kit - DP860-KIT

This 8'' DuraPlus Mobile Home Kit is the perfect option for the homeowner that has a mobile or manufactured home, and it does not require professional installation and carries a lifetime warranty.

Included in this 8" DuraPlus Kit:

• 8" DuraPlus Chimney Cap
• 8" DuraPlus Storm Collar
• 8" DuraPlus Ceiling Support Box
• 8" DuraPlus Roof Flashing
• 8" DVL Adapter
• 8" DuraPlus Attic Insulation Shield

Not Included in This Kit:

• 8" DVL Black Stove Pipe Lengths- DVL (Double Wall Stove Pipe) is required for Mobile/Manufactured Home Installations
• 8" DuraPlus Chimney Pipe Sections Lengths

The 8'' DuraPlus Mobile Home Kit contains all the components needed to install an 8" chimney (excluding black stove pipe and DuraPlus chimney sections) straight up through a normal flat ceiling.

This kit includes the following (from the cap down):

8" DuraPlus Chimney Cap is required where the chimney pipe terminates above the roof line. This Chimney Cap has removable screws to allow for easier cleaning of the chimney and spark arrestor screen. Includes spark arrestor screen.

8" DuraPlus Storm Collar - this aluminum storm collar is required for use on any through-the-roof installations using a roof flashing.

8" DuraPlus Roof Flashing - provides leak proof roof penetration. The purpose of the roof flashing is to weatherproof the roof where the chimney penetrates the roof. The flashing gets tucked under the shingles and the shingles are cut around the flashing if needed. The flashing is sealed to the roof with silicone to provide that needed seal to prevent water from getting under the flashing and getting into the attic or house, then a storm collar is placed over the flashing and sealed to the chimney pipe with a high temp silicone to prevent water from running down the chimney.

8" DuraPlus Attic Insulation Shield - is required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. The Attic Insulation Shield fits over the Firestop Radiation Shield or Support box and consists of two-parts - a collar and a base.

8" DuraPlus Square Ceiling Support Box - 6" DuraPlus Ceiling Support Box is for use with flat, vaulted or cathedral ceilings. It supports up to 35' of chimney pipe with a built-in starter section. The Square Ceiling Support box features a sleek black finish to add pleasing aesthetics to the fully functional build.

8" DVL Adapter - Use to connect from double-wall DVL to DuraTech, DuraPlus, DuraPlus HTC, and DuraLiner for a through-the-wall or ceiling support installation. Required for proper connection. Provides a strong mechanical connection. Painted black.

Simply add enough 8" stove pipe and class A chimney pipe to complete your installation.

NOTE: Mobile and Manufactured Home Installations require Double Wall Stove Pipe (DVL) and Triple Wall Chimney Class A Pipe (DuraPlus) to meet safety and UL Standards

WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harmFor more information go to http://www.P65Warnings.ca.gov.
Specifications:

• .016'' 430 stainless steel outer wall or .018'' galvanized steel outer wall.
• .018'' aluminized steel intermediate liner.
• .016'' 430 stainless steel inner liner.
• Insulated layers of ceramic blanket plus ventilated air space.
• Locks tightly with a precision twist-lock connection.