8'' DuraTech Cathedral Ceiling Support Kit - DT820-KIT

The 8" DuraTech Cathedral Ceiling Support Kit is a top-rated customer pick and preferred by professional installers.

Included in this 8" DuraTech Kit:

• 8" DuraTech Chimney Cap
• 8" DuraTech Storm Collar
• 8" DuraTech Cathedral Ceiling Support Box
• 8" DuraTech Roof Flashing
• 8" DuraTech Stove PIpe Adapter

Options Available Include.

• 8" DuraTech Spark Arrestor
• 8" DuraTech Extended Roof Bracket

Not Included in this kit.

• 8" DuraBlack, or DVL Black Stove Pipe Lengths
• 8" DuraTech Chimney Pipe Sections Lengths

The 8" DuraTech Cathedral Ceiling Support Kit contains all the components needed to install an 8" chimney (excluding black stove pipe and DuraTech chimney sections) straight up through a cathedral ceiling.

This kit includes the following: (from the cap down)

8" DuraTech Chimney Caps are required where the pipe terminates above the roofline. This DuraTech Chimney Cap is made of stainless steel and designed to twist-lock onto the chimney pipe. Removable screws allow for the cleaning of the chimney and the spark arrestor screen. Shown with optional spark arrestor screen (sold separately).

6" DuraTech Storm Collar are aluminum constructed chimney components that slip around the pipe just above the flashing used in through-the-roof installations. The inner edge of the Storm Collar is sealed to the chimney pipe with a non-hardening 500° F high-temperature sealant.

8" DuraTech Square Ceiling Support Boxes are used to support chimney pipe and provide a positive connection between the support box and the chimney pipe with a built-in twist lock feature. This ceiling support is suitable for both flat and cathedral ceiling applications and it can also be used in short attic spaces. Designed for appliances that are tested and listed for use with 2100° F HT chimney systems, such as woodstoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. This Ceiling support fits between 16" on center joists and most mobile home applications and supports up to 60' of DuraTech Chimney. A 2" wide trim collar is included.

8" DuraTech Roof Flashings are used to weather proof the penetration of chimney pip through the roof. A storm collar is required (not included). Select the proper roof flashing based on the pitch of the roof. For example, a 6/12 pitch has a vertical rise of 6" over a horizontal distance of 12".

New 8" DuraTech Support Box with complete installation kit: The new 8DT-CS-2 support box, available in 11", 24", or 36", comes with all the necessary components, eliminating the need for separate adapters.

• All-In-One Installation - The support box includes everything required for installation, making it easy to connect your stove pipe directly to the ceiling support without additional adapters.
• Available in Multiple Sizes - Choose from 11", 24", or 36" sizes to match your specific installation needs for a customized fit.
• Universal Compatibility - Works seamlessly with DuraTech, DuraPlus, DuraPlus HTC, and DuraLiner chimney systems, providing a secure and leak-proof connection.
• Streamlined Installation Process - Designed for quick and straightforward installation, ensuring a secure connection for both through-the-wall and ceiling setups.

Optional extended roof bracket is required when your chimney extends more than 4' above the roof. It will provide stability to the chimney against wind and snow

WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
Specifications:

• .020'' 430 stainless steel inner wall
• .016'' 430 stainless steel or .021'' galvalume steel outer wall options
• Thermal Tech (ceramic refractory) blanket insulation encased between walls
• Stainless steel end rings to seal the pipe
• Light weight insulation, twist-lock fittings, support boxes with factory installed starter sections