-
Details
The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. Its base mounts to the sweep's ring which attaches to the flue tile with silicone sealant. A 30' stainless steel cable drops down the flue, and a hardware set mounts in the firebox. The end result is a damper that opens and closes with ease at the tug of a drop down cable. The Lock-Top II is equipped with a fire safety device that enables the damper to remain open in case of a chimney fire.
*Top-sealing dampers are not recommended with gas logs- failure to open could cause carbon monoxide to back up into the house.
- Measures 8" x 17"
- 5/8" mesh screen
- 11 3/8" Overall height
- 105 sq. in. cross-sectional area
- Fits inside flue sizes 6" x 14" to 9 1/2" x 17 1/2"
- 30' Stainless steel cable included
- Silicone sealant included
- Sweep's ring included
Specifications:- Measures 8" x 17"
- 5/8" Mesh screen
- 11 3/4" Overall height
- Fits inside flue sizes 6" x 14" to 9 1/2" x 17 1/2"
- Stainless steel and cast aluminum construction
- Silicone sealant, sweep's ring, 30' stainless steel cable included
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Chimney Caps Fits Lengths From 14 Inch Fits Lengths From 16.5 Inch Fits Lengths From 17 Inch Fits Lengths From 17.5 Inch Fits Lengths From 14.5 Inch Fits Lengths From 15 Inch Fits Lengths From 15.5 Inch Fits Lengths From 16 Inch Fits Widths From 6.5 Inch Fits Widths From 7.5 Inch Fits Widths From 9 Inch Fits Widths From 9.5 Inch Fits Widths From 6 Inch Fits Widths From 7 Inch Fits Widths From 8 Inch Fits Widths From 8.5 Inch Mesh 5/8in Mesh Pipe Piece Damper Pipe Piece Chimney Cap Additional Information HR-mail-only true Left Overlay Image Made in the USA.png Brand LockTop
The Lock-Top II Chimney Cap/Damper arrives fully assembled and ready to install. Its base mounts to the sweep's ring which attaches to the flue tile with silicone sealant. A 30' stainless steel cable drops down the flue, and a hardware set mounts in the firebox. The end result is a damper that opens and closes with ease at the tug of a drop down cable. The Lock-Top II is equipped with a fire safety device that enables the damper to remain open in case of a chimney fire.
*Top-sealing dampers are not recommended with gas logs- failure to open could cause carbon monoxide to back up into the house.
- Measures 8" x 17"
- 5/8" mesh screen
- 11 3/8" Overall height
- 105 sq. in. cross-sectional area
- Fits inside flue sizes 6" x 14" to 9 1/2" x 17 1/2"
- 30' Stainless steel cable included
- Silicone sealant included
- Sweep's ring included
Specifications:
- Measures 8" x 17"
- 5/8" Mesh screen
- 11 3/4" Overall height
- Fits inside flue sizes 6" x 14" to 9 1/2" x 17 1/2"
- Stainless steel and cast aluminum construction
- Silicone sealant, sweep's ring, 30' stainless steel cable included
Clearance | Non-Clearance |
---|---|
Country Of Origin | United States |
Season | Everyday |
Product Type | Chimney Caps |
Fits Lengths From | 14 Inch |
Fits Lengths From | 16.5 Inch |
Fits Lengths From | 17 Inch |
Fits Lengths From | 17.5 Inch |
Fits Lengths From | 14.5 Inch |
Fits Lengths From | 15 Inch |
Fits Lengths From | 15.5 Inch |
Fits Lengths From | 16 Inch |
Fits Widths From | 6.5 Inch |
Fits Widths From | 7.5 Inch |
Fits Widths From | 9 Inch |
Fits Widths From | 9.5 Inch |
Fits Widths From | 6 Inch |
Fits Widths From | 7 Inch |
Fits Widths From | 8 Inch |
Fits Widths From | 8.5 Inch |
Mesh | 5/8in Mesh |
Pipe Piece | Damper |
Pipe Piece | Chimney Cap |
Additional Information | |
HR-mail-only | true |
Left Overlay Image | Made in the USA.png |
Brand | LockTop |