null
Menu Toggle

Menu

9 Tube Fireplace Heater-With Blower

9 Tube Fireplace Heater-With Blower
SKU: NLE5GS_FHK_9
MPN: FH9 WITH BLOWER
$1,575.99
    • 2 speed blower
    • 160 CFM Fan on blower
    • Delivers up to 108,000 BTU's of heat
    • Diameter of tubes 1-3/4"
    • Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust.
    • Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube.
    • Size: 20-1/2" High, 20" Deep, 41" Front Width, and 33" Back Width.
    • See Additional information tab for sizing

    Custom Size Heaters cannot be returned nor exchanged. Please verify your measurements before ordering. This unit is a custom size.

More Info ↴
Availability: Ships in 1 to 2 weeks
$1,575.99

Downloads

‎
  • Details

    Custom Size Heaters cannot be returned nor exchanged. Please verify your measurements before ordering. This unit is a custom size.

    The Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500'F and will produce up to 50,000+ BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and has a limited one-year warranty. The FHK is easy to install, simply assemble the blower on the tubes, seal it with the supplied silicone seale,r and set into your fireplace. Measures: 20-1/2" High , 20" Deep, 41" Front Width, and 33" Back Width.

    Click here for a brochure. For smaller fireplaces see the FHZC Fireplace Heater.

    Product Note: This fireplace heater is a custom size and will take approx 2 to 4 weeks to receive.

    • Low Cost
    • Simple Installation
    • Works during a power outage
    • Fits most fireplaces (See additional information tab for sizing)
    • Heavy gauge aluminized steel tubing for long life
    • Blower Box can mount on left or right side by flipping the manifold
    • 2 Speed blower delivers up to 108,000 BTU's of heat for a 500% heat output increase!
    • Can be used with a glass fireplace door but additional flexible hose may be needed and must be removed to close the doors when not in use.

    Additional Information:

    Number of
    Tubes
    Front Width
    Rear width
    Front Height
    Rear Height
    Depth
    BTU per
    Hour     (max)
    5 Tube (standard size)
    25"
    17"
    20 1/2"
    13 1/2"
    18"
    60,000
    6 Tubes
    29"
    21"
    20 1/2"
    13 1/2"
    18"
    72,000
    7 Tubes
    33"
    25"
    20 1/2"
    13 1/2"
    18"
    84,000
    8 Tubes
    37"
    29"
    20 1/2"
    13 1/2"
    18"
    96,000
    9 Tubes
    41"
    33"
    20 1/2"
    13 1/2"
    18"
    108,000
    10 Tubes
    45"
    37"
    20 1/2"
    13 1/2"
    18"
    120,000

    Specifications:
    • 2 speed blower
    • 160 CFM Fan on blower
    • Delivers up to 108,000 BTU's of heat
    • Diameter of tubes 1-3/4"
    • Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust.
    • Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube.
    • Size: 20-1/2" High, 20" Deep, 41" Front Width, and 33" Back Width.
    • See Additional information tab for sizing
  • Additional Information
    Clearance Non-Clearance
    Country Of Origin United States
    Season Everyday
    Product Type Fireplace Grates
    Product Type Custom Heaters
    Return Policy Not Returnable
    Left Overlay Image Made in the USA.png
    Brand Custom Firescreen

Custom Size Heaters cannot be returned nor exchanged. Please verify your measurements before ordering. This unit is a custom size.

The Fireplace Heater was developed to dramatically increase convection heat (hot air) coming from your fireplace. The unique design of this grate heater super heats the air within the exchanger tubes to over 500'F and will produce up to 50,000+ BTUs of heat, enough to heat a large room or two. It fits into most fireplaces and has a limited one-year warranty. The FHK is easy to install, simply assemble the blower on the tubes, seal it with the supplied silicone seale,r and set into your fireplace. Measures: 20-1/2" High , 20" Deep, 41" Front Width, and 33" Back Width.

Click here for a brochure. For smaller fireplaces see the FHZC Fireplace Heater.

Product Note: This fireplace heater is a custom size and will take approx 2 to 4 weeks to receive.

  • Low Cost
  • Simple Installation
  • Works during a power outage
  • Fits most fireplaces (See additional information tab for sizing)
  • Heavy gauge aluminized steel tubing for long life
  • Blower Box can mount on left or right side by flipping the manifold
  • 2 Speed blower delivers up to 108,000 BTU's of heat for a 500% heat output increase!
  • Can be used with a glass fireplace door but additional flexible hose may be needed and must be removed to close the doors when not in use.

Additional Information:

Number of
Tubes
Front Width
Rear width
Front Height
Rear Height
Depth
BTU per
Hour (max)
5 Tube (standard size)
25"
17"
20 1/2"
13 1/2"
18"
60,000
6 Tubes
29"
21"
20 1/2"
13 1/2"
18"
72,000
7 Tubes
33"
25"
20 1/2"
13 1/2"
18"
84,000
8 Tubes
37"
29"
20 1/2"
13 1/2"
18"
96,000
9 Tubes
41"
33"
20 1/2"
13 1/2"
18"
108,000
10 Tubes
45"
37"
20 1/2"
13 1/2"
18"
120,000

Specifications:
  • 2 speed blower
  • 160 CFM Fan on blower
  • Delivers up to 108,000 BTU's of heat
  • Diameter of tubes 1-3/4"
  • Heat Pipes are made of .063 heavy gauge aluminized steel which inhibits burn thru and rust.
  • Flexible blower connector is adjustable from 8" to 18" and can be extended if necessary by ordering an additional flexible tube.
  • Size: 20-1/2" High, 20" Deep, 41" Front Width, and 33" Back Width.
  • See Additional information tab for sizing
Clearance Non-Clearance
Country Of Origin United States
Season Everyday
Product Type Fireplace Grates
Product Type Custom Heaters
Return Policy Not Returnable
Left Overlay Image Made in the USA.png
Brand Custom Firescreen
‎