-
Details
The 40-Foot Architectural Series EC40 Satin Flagpole helps showcase your flags magnificently. It towers 40 feet above the ground from its 44 feet total shaft length. It features an external halyard, ground set, tapered cone aluminum flagpole with diameters of 8 inches at the bottom and 3.5 inches at the top. This one-piece pole has a 0.188 aluminum wall thickness that can hold out against a maximum of 203 mph unflagged and 120 mph flagged wind speed ratings. It is best suitable to display flags with 8 feet by 12 feet size.
The Architectural Series EC40 Satin Flagpole offers a standard satin-brushed finish and is also available in anodized clear, black, or bronze coating but with an additional cost. While all of the aluminum flagpoles entail low maintenance to retain their natural satin appearance, the anodized flagpoles offer an even better solution. The satin-brushed finished flagpoles will generally keep clean with the rainfall in most areas, however, because the exterior of the flagpole is aluminum, it will continue to oxidize throughout its lifetime. Special cleaning agents may be necessary to remove the discoloration caused by oxidation. The anodized flagpoles, on one hand, do not encounter this problem since they create a barrier on the external surface of the aluminum flagpole to remove the oxidation process. With this excellent coating, the aluminum is not exposed to the elements and it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. For this reason, we recommend the purchase of an anodized finish on all of our flagpoles.
Anodized poles take maximum time to ship because they are made to order.
Flagpole with sizes up to 35 feet are shipped as one-piece poles, while those with sizes above 35 feet are shipped in sections and fitted with a self-aligning sleeve that will not require field welding. Our commercial poles by truck shipment and our shipping calculator are not able to accurately calculate the cost. For more information about buying a commercial grade flagpole click here.
If you plan on flying 2 flags you will need to order an extra set of flag snaps and snap covers.
Standard Accessories (Click below to see):
-
Warranty Information
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Butt Diameter 8in Exposed Height 40ft Flagged Windspeed 120 MPH Overall Height 44ft Size 40ft Top Diameter 3.5in Unflagged Windspeed 195 mph Wall Thickness .188in Features External Halyard Features Revolving Truck Type Aluminum Type Commercial Type Traditional Product Type Flagpoles Color Black Anodized Color Clear Anodized Color Bronze Anodized Color Satin HR-CX true Right Overlay Image Wind Speed Rating Storm.png Left Overlay Image Made in the USA.png Brand Eder
The 40-Foot Architectural Series EC40 Satin Flagpole helps showcase your flags magnificently. It towers 40 feet above the ground from its 44 feet total shaft length. It features an external halyard, ground set, tapered cone aluminum flagpole with diameters of 8 inches at the bottom and 3.5 inches at the top. This one-piece pole has a 0.188 aluminum wall thickness that can hold out against a maximum of 203 mph unflagged and 120 mph flagged wind speed ratings. It is best suitable to display flags with 8 feet by 12 feet size.
The Architectural Series EC40 Satin Flagpole offers a standard satin-brushed finish and is also available in anodized clear, black, or bronze coating but with an additional cost. While all of the aluminum flagpoles entail low maintenance to retain their natural satin appearance, the anodized flagpoles offer an even better solution. The satin-brushed finished flagpoles will generally keep clean with the rainfall in most areas, however, because the exterior of the flagpole is aluminum, it will continue to oxidize throughout its lifetime. Special cleaning agents may be necessary to remove the discoloration caused by oxidation. The anodized flagpoles, on one hand, do not encounter this problem since they create a barrier on the external surface of the aluminum flagpole to remove the oxidation process. With this excellent coating, the aluminum is not exposed to the elements and it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. For this reason, we recommend the purchase of an anodized finish on all of our flagpoles.
Anodized poles take maximum time to ship because they are made to order.
Flagpole with sizes up to 35 feet are shipped as one-piece poles, while those with sizes above 35 feet are shipped in sections and fitted with a self-aligning sleeve that will not require field welding. Our commercial poles by truck shipment and our shipping calculator are not able to accurately calculate the cost. For more information about buying a commercial grade flagpole click here.
If you plan on flying 2 flags you will need to order an extra set of flag snaps and snap covers.
Standard Accessories (Click below to see):
Clearance | Non-Clearance |
---|---|
Country Of Origin | United States |
Season | Everyday |
Butt Diameter | 8in |
Exposed Height | 40ft |
Flagged Windspeed | 120 MPH |
Overall Height | 44ft |
Size | 40ft |
Top Diameter | 3.5in |
Unflagged Windspeed | 195 mph |
Wall Thickness | .188in |
Features | External Halyard |
Features | Revolving Truck |
Type | Aluminum |
Type | Commercial |
Type | Traditional |
Product Type | Flagpoles |
Color | Black Anodized |
Color | Clear Anodized |
Color | Bronze Anodized |
Color | Satin |
HR-CX | true |
Right Overlay Image | Wind Speed Rating Storm.png |
Left Overlay Image | Made in the USA.png |
Brand | Eder |