45-Foot Architectural Series EC45 Satin Flagpole

Hoist them high, raise them proud with this 45-Foot Architectural Series EC45 Satin Flagpole that stands 45 feet above the ground from its total shaft length of 49.5 feet. It presents an external halyard, ground set, tapered cone aluminum flagpole with diameters of 8 inches at the bottom and 3.5 inches at the top. This pole can withstand a maximum of 166 mph unflagged and 100 mph flagged wind speed ratings due to its 0.188 aluminum wall thickness. It best suits flags with 8 feet x 12 feet in size.

This pole is available in standard satin finish, and also offers clear, bronze, and black anodized finish but with an additional cost. Aluminum flagpoles entail low maintenance to retain their natural lustrousness, but the anodized flagpoles have a better solution. The satin-brushed finished flagpoles will generally keep clean with the rainfall in most areas, however, because the exterior of the flagpole is aluminum, it will continue to oxidize throughout its lifetime. Special cleaning agents may be required to remove the discoloration caused by oxidation. One the other hand, the anodized flagpoles do not encounter this problem because they make a barrier on the external surface of the aluminum flagpole, removing the oxidation process. With this, the aluminum cannot oxidize because it is not exposed to the elements. The anodized finishes allow you to clean your flagpole with simple soap and water. Because of this, it is recommended to purchase an anodized finish on all offered flagpoles.

Anodized poles take maximum time to ship because they are made to order.