Case of 25 - 4ft LED Universal Tube - Type AB - 18W - Color Tunable 30K/35K/40K/50K/65K - LumeGen

Upgrade your fluorescent lighting with this Type A+B T8 LED Tube Light, a versatile and efficient solution designed to meet all your lighting needs. Combining both double-ended and single-ended power inputs, this LED tube is compatible with emergency electronic ballasts, dimming electronic ballasts, and standard electronic ballasts.

You can easily change the color temperature (CCT) to 3000K, 3500K, 4000K, 5000K, or 6500K using the CCT switch selector on the endcap allowing for customizable lighting. This LED tube is also UL Listed, shatterproof with a Glass Body with PET coating, and has a frosted lens. With an 80+ CRI and rated to last 50,000 hours, this LED tube will reduce energy consumption compared to traditional fluorescents and give you bright lighting for any task or application.

Key Specifications:

• Number of LED Tubes: Case of 25
• LED Tube Compatibility: Type A+B - Universal/Ballast Bypass Compatible
• Power Operation: Single and Double Ended
• Length: 4ft.
• Watts: 18W
• Lumens: 2250 Lumens
• CCT: Selectable between 3000K, 3500K, 4000K, 5000K, and 6500K
• CRI: 83
• Beam Angle: 200 Degrees
• Input Voltage: AC120-277V
• Material: Frosted Glass Lens with PET Coating
• Dimmable: Yes, See Spec Sheet for more details

Dimensions: 47.72"L x 1" Diameter

Dimming module SKU LEDDMMD1000050700 is sold separately.

Discover the Benefits of Plug and Play LED Tubes

Plug and Play LED Tubes are here to stay! They make it easy to replace fluorescent tubes and upgrade your space with bright LED light. Plug and play tubes are easy to install. The process is easy as Step 1, 2, and 3.

1. Turn off power to the light being changed before installation using the switch on the breaker panel.
2. Remove the fluorescent tubes. Remember - Fluorescent tubes contain mercury and should be disposed of properly.
3. Install the LED tubes and turn the power back on.

Please make sure to read the instruction manual of the LED tubes and fixture the tubes are being installed into as the above instructions may not be 100% correct per the specific tubes or product.

Can you put led tube lights in a fluorescent fixture? Can I replace my fluorescent T8 linear bulbs with LEDs?

Yes! LED Tubes can be installed into a fluorescent fixture. When tubes are Type A + B. Type A or Type B, it is easy to replace those flickering fluorescents. A brief explanation of Type A and B LED linear tubes is below.

Type A LED Linear Tubes are often called "plug and play" tubes. This is because they can simply be installed into the existing fixture.

Type B LED Linear Tubes are often referred to as "ballast bypass." They work with all fluorescent fixtures including ballast-free fixtures. Type B linear tubes power goes directly to the lamp sockets and no longer through the ballast.

Type A + B can be used with or without a ballast. It is ultimately the buyer's preference what they want to do. Type A installation uses the LED Tube + Ballast power for more energy consumption compared to Type B installation only uses the raw tube power and is more energy-efficient.

What does ballast bypass mean? How does ballast bypass work?

Ballast bypass means when installing the LED linear tube, the fixture's ballast will need to be removed first. The power will then go directly to the lamp sockets and no longer through the ballast. The benefits of ballast bypass LED replacement tubes include lights not being shut down by a ballast failure, no more ballast replacements, and savings on the energy bill because energy is no longer drawing from the ballast.