30-Foot Deluxe IH Series EC30IH Flagpole

Hoist a neat and sturdy flagpole installation with a top-notch 30-Foot Deluxe IH Series EC30IH Flagpole that displays an internal halyard, ground set cone tapered aluminum construction. This pole stands 30 feet above the ground from its overall 33 feet length, having a 3.5-inch top and 6-inch butt pole diameters. It can resist a maximum of 211 mph unflagged and 120+ mph flagged wind speed ratings with its 0.188 aluminum wall thickness. This pole is best suitable for flags measuring 5 feet x 8 feet.

This flagpole is equipped with a winch installed in its shaft's interior that works only through its removable crank handle. While the stainless steel cable unrolls from the winch, it goes up through the inside of the flagpole shaft, over the truck sheave to the shaft's exterior, where the retaining ring offers a sliding anchor. It has a heavily coated neoprene counterweight attached to the retaining ring lowering the halyard for fastening or removing the flag. The halyard is then raised completely out of reach of vandals.

This internal halyard pole is available in a standard satin finish but also offers a clear, bronze, and black anodized finish at an additional cost. While all aluminum flagpoles require little maintenance to retain their natural shine, anodized flagpoles provide a better way of handling them. The satin-brushed finished flagpoles regularly keep clean with the rainfall in most areas, but the exterior of the flagpole is aluminum, so it oxidizes as time goes by. Special cleaning agents may be required to remove the discoloration caused by oxidation. The anodized flagpoles create a barrier on the external surface of the aluminum flagpole through anodization, eliminating oxidation. The aluminum is not exposed to the elements with an anodized finish, making it hold out against oxidizing. The anodized finishes allow you to clean your flagpole with simple soap and water. It is recommended that you purchase an anodized finish on all of your flagpole needs.

Anodized poles take maximum time to ship because they are made to order.

Flagpoles with sizes up to 35 feet ship as one-piece poles, while those that have sizes above 35 feet ship in sections and fit with a self-aligning sleeve that requires no field welding.