40-Foot Deluxe IH Series EC40IH Flagpole

A nationalistic representation must fly proudly with a durable 40-Foot Deluxe IH Series EC40IH Flagpole. This internal halyard ground set cone tapered aluminum pole measures 40 feet above the floor from its overall length of 44 feet with a 3.5-inch top and 8-inch bottom pole diameters. This flagstaff goes excellently with an 8 feet x 12 feet sized flag, and resists a maximum of 203 mph unflagged and 120 mph flagged wind speed ratings having a 0.188 aluminum wall thickness.

This internal halyard pole features a winch mounted to its shaft's interior that works only with a removable crank handle. As the stainless steel cable unrolls from the winch, it passes up through the inside of this flagpole shaft, over the truck sheave to the shaft's exterior, where the retaining ring shows a sliding anchor. This pole has a heavily covered neoprene counterweight linked to the retaining ring lowering the halyard for fastening or detaching the flag. The halyard is then hoisted totally, preventing vandalism.

This ground set pole has a standard satin finish but also offers a clear, bronze, and black anodized finish at an extra charge. While aluminum flagpoles require little maintenance to retain their natural shine, anodized flagpoles have a simpler process of sustaining them. The satin-brushed finished flagpoles normally keep clean with the rainfall in most areas, but the exterior of the flagpole is aluminum, so it oxidizes as time goes by. Special cleaning agents may be necessary to get rid of the discoloration caused by oxidation. The anodized flagpoles set a barrier on the external surface of the aluminum flagpole through anodization, eliminating oxidation. The aluminum is not exposed to the elements with an anodized finish, protecting it from oxidizing. The anodized finishes allow you to clean your flagpole with simple soap and water. It is recommended that you use an anodized finish on all of your flagpoles.

Anodized poles take maximum time to ship because they are made to order.

Flagpoles with sizes up to 35 feet ship as one-piece poles, while those that have sizes above 35 feet ship in sections and fit with a self-aligning sleeve that requires no field welding.