-
Details
Allow your patriotic pride to soar high by having this 45-Foot Deluxe IH Series EC45IH Flagpole lift and display your colorful spirit up. This pole features a sturdy internal halyard ground set cone tapered aluminum construction that measures 45 feet above the ground from its total length of 49.5 feet with a 3.5-inch top and 8-inch bottom pole diameters. It best suits an 8 feet x 12 feet sized flag. This flagpole braves a maximum of 166 mph unflagged and 100 mph flagged wind speed ratings with its 0.188 aluminum wall thickness.
This internal halyard pole features a winch mounted to its shaft's interior that works only with a removable crank handle. As the stainless steel cable unrolls from the winch, it passes up through the inside of this flagpole shaft, over the truck sheave to the shaft's exterior, where the retaining ring shows a sliding anchor. This pole has a heavily covered neoprene counterweight linked to the retaining ring lowering the halyard for fastening or detaching the flag. The halyard is then hoisted totally, preventing vandalism.
This ground set pole has a standard satin finish but also offers a clear, bronze, and black anodized finish at an extra charge. While aluminum flagpoles require little maintenance to retain their natural shine, anodized flagpoles have a simpler process of sustaining them. The satin-brushed finished flagpoles normally keep clean with the rainfall in most areas, but the exterior of the flagpole is aluminum, so it oxidizes as time goes by. Special cleaning agents may be necessary to get rid of the discoloration caused by oxidation. The anodized flagpoles set a barrier on the external surface of the aluminum flagpole through anodization, eliminating oxidation. The aluminum is not exposed to the elements with an anodized finish, protecting it from oxidizing. The anodized finishes allow you to clean your flagpole with simple soap and water. It is recommended that you use an anodized finish on all of your flagpoles.
Anodized poles take maximum time to ship because they are made to order.
Flagpoles with sizes up to 35 feet ship as one-piece poles, while those that have sizes above 35 feet ship in sections and fit with a self-aligning sleeve that requires no field welding.
-
Warranty Information
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Butt Diameter 8in Exposed Height 45ft Flagged Windspeed 100 MPH Overall Height 49ft Size 45ft Top Diameter 3.5in Unflagged Windspeed 166 MPH Wall Thickness .188in Features Internal Halyard Features Revolving Truck Type Aluminum Type Commercial Type Traditional Product Type Flagpoles Color Bronze Anodized Color Satin Color Clear Anodized Color Black Anodized HR-CX true Left Overlay Image Made in the USA.png Brand Eder
Allow your patriotic pride to soar high by having this 45-Foot Deluxe IH Series EC45IH Flagpole lift and display your colorful spirit up. This pole features a sturdy internal halyard ground set cone tapered aluminum construction that measures 45 feet above the ground from its total length of 49.5 feet with a 3.5-inch top and 8-inch bottom pole diameters. It best suits an 8 feet x 12 feet sized flag. This flagpole braves a maximum of 166 mph unflagged and 100 mph flagged wind speed ratings with its 0.188 aluminum wall thickness.
This internal halyard pole features a winch mounted to its shaft's interior that works only with a removable crank handle. As the stainless steel cable unrolls from the winch, it passes up through the inside of this flagpole shaft, over the truck sheave to the shaft's exterior, where the retaining ring shows a sliding anchor. This pole has a heavily covered neoprene counterweight linked to the retaining ring lowering the halyard for fastening or detaching the flag. The halyard is then hoisted totally, preventing vandalism.
This ground set pole has a standard satin finish but also offers a clear, bronze, and black anodized finish at an extra charge. While aluminum flagpoles require little maintenance to retain their natural shine, anodized flagpoles have a simpler process of sustaining them. The satin-brushed finished flagpoles normally keep clean with the rainfall in most areas, but the exterior of the flagpole is aluminum, so it oxidizes as time goes by. Special cleaning agents may be necessary to get rid of the discoloration caused by oxidation. The anodized flagpoles set a barrier on the external surface of the aluminum flagpole through anodization, eliminating oxidation. The aluminum is not exposed to the elements with an anodized finish, protecting it from oxidizing. The anodized finishes allow you to clean your flagpole with simple soap and water. It is recommended that you use an anodized finish on all of your flagpoles.
Anodized poles take maximum time to ship because they are made to order.
Flagpoles with sizes up to 35 feet ship as one-piece poles, while those that have sizes above 35 feet ship in sections and fit with a self-aligning sleeve that requires no field welding.
Clearance | Non-Clearance |
---|---|
Country Of Origin | United States |
Season | Everyday |
Butt Diameter | 8in |
Exposed Height | 45ft |
Flagged Windspeed | 100 MPH |
Overall Height | 49ft |
Size | 45ft |
Top Diameter | 3.5in |
Unflagged Windspeed | 166 MPH |
Wall Thickness | .188in |
Features | Internal Halyard |
Features | Revolving Truck |
Type | Aluminum |
Type | Commercial |
Type | Traditional |
Product Type | Flagpoles |
Color | Bronze Anodized |
Color | Satin |
Color | Clear Anodized |
Color | Black Anodized |
HR-CX | true |
Left Overlay Image | Made in the USA.png |
Brand | Eder |