This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
Use as insulator for stainless steel liners in masonry chimneys. All DuraFlex products must be insulated to meet UL 1777 requirements.DuraFlex SS flexible relining is designed for masonry chimneys and for use with gas, wood pellet, oil, or wood appliances; Including fireplace inserts, furnaces, boilers, and water heaters.
Required to insulate stainless steel liner to meet UL 1777 when proper clearance to chimney and framing are not available.
A 1" clearance from stainless steel liner to interior wall of the masonry chimney and 1" clearance from the masonry to the house framing are required in order to meet UL 1777. If you only meet one of these clearances a 1/4" wrap of insulation is required. If you do not have either of these clearances then a 1/2" wrap or 2 wraps of 1/4" insulation are required. If these two clearances are available then no insulation is needed. AluFoil and ProMesh required.
Additional Information:
DuraFlex SS relining systems ensure safe and efficient venting of heating appliances while protecting the masonry chimney from the damaging effects of flue product condensation. DuraFlex is available in 304 and 316Ti stainless steel. The 304 and 316Ti SS are designed for use with pellet, non-condensing gas, and oil appliances. DuraFlex SS and 316Ti SS, when used with the Simpson DuraVent Two-Ply Insulation Sleeve, may be used for relining wood burning fireplace inserts and stoves to meet UL 1777 and ULC S635 standards with 0" clearance to masonry.
WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harmFor more information go to http://www.P65Warnings.ca.gov.
Specifications:- Dimensions: 5" - 6" Diameter x 22" Wide x 25' Long x 1/2" Thick
- Clearances: 0" to Masonry
- Listings: UL Listed to UL1777
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Chimney Pipe Diameter 8 Inch Type Chimney Liner Pipe HR-mail-only true Left Overlay Image Made in the USA.png Brand DuraFlex SS
 Use as insulator for stainless steel liners in masonry chimneys. All DuraFlex products must be insulated to meet UL 1777 requirements.
DuraFlex SS flexible relining is designed for masonry chimneys and for use with gas, wood pellet, oil, or wood appliances; Including fireplace inserts, furnaces, boilers, and water heaters.
Required to insulate stainless steel liner to meet UL 1777 when proper clearance to chimney and framing are not available.
A 1" clearance from stainless steel liner to interior wall of the masonry chimney and 1" clearance from the masonry to the house framing are required in order to meet UL 1777. If you only meet one of these clearances a 1/4" wrap of insulation is required. If you do not have either of these clearances then a 1/2" wrap or 2 wraps of 1/4" insulation are required. If these two clearances are available then no insulation is needed. AluFoil and ProMesh required.
Additional Information:
DuraFlex SS relining systems ensure safe and efficient venting of heating appliances while protecting the masonry chimney from the damaging effects of flue product condensation. DuraFlex is available in 304 and 316Ti stainless steel. The 304 and 316Ti SS are designed for use with pellet, non-condensing gas, and oil appliances. DuraFlex SS and 316Ti SS, when used with the Simpson DuraVent Two-Ply Insulation Sleeve, may be used for relining wood burning fireplace inserts and stoves to meet UL 1777 and ULC S635 standards with 0" clearance to masonry.
WARNING: This product can expose you to chemicals including Chromium, which is known to the State Of California to cause cancer and birth defects or other reproductive harmFor more information go to http://www.P65Warnings.ca.gov.
Specifications:
- Dimensions: 5" - 6" Diameter x 22" Wide x 25' Long x 1/2" Thick
- Clearances: 0" to Masonry
- Listings: UL Listed to UL1777
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Season | Everyday |
| Product Type | Chimney Pipe |
| Diameter | 8 Inch |
| Type | Chimney Liner Pipe |
| HR-mail-only | true |
| Left Overlay Image | Made in the USA.png |
| Brand | DuraFlex SS |
