null
Menu Toggle

Menu

Search Box
Search Box

ECXA30IH Deluxe Internal Halyard Series 30ft 2 Sections Commercial Flagpole - .156in Wall Thickness - 5in Butt Diameter

ECXA30IH Deluxe Internal Halyard Series 30ft 2 Sections Commercial Flagpole - .156in Wall Thickness - 5in Butt Diameter
SKU: CPECXA30IH
MPN: ECXA30IH
$2,899.99 - $3,579.99
Availability: In Stock: Ships in 4 to 6 weeks
$2,899.99 - $3,579.99 each

  • Details

    The 30 Foot Deluxe IH Series is an aluminum ground-set, internal halyard flagpole. It contains a winch mounted inside of the of the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retaining ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals. This flagpole will be shipped with 2 sections and fitted with a self-aligning sleeve which requires no field welding.

    Included Standard Accessories:

    • Cast aluminum revolving truck with enclosed stainless steel bearings and raceway
    • Stainless steel cable assembly
    • Deluxe flag arrangement
    • Retainer ring and counterweight
    • M-Winch system
    • Spun aluminum flash collar
    • Galvanized steel foundation sleeve

    Available in standard satin finish, however we also offer clear, bronze and black anodized finish at additional cost. While all of our aluminum flagpoles require little maintenance to retain their natural shine, our anodized flagpoles offer an even simpler solution. Our satin brushed finished flagpoles will generally keep clean with the rainfall in most areas, however; because the exterior of the flagpole is aluminum, it will continue to oxidize throughout its lifetime. Special cleaning agents may be required to remove the discoloration caused by this process of oxidation. Our anodized flagpoles do not encounter this problem. The process of anodization actually creates a barrier on the external surface of the aluminum flagpole, thus eliminating the oxidation process. Because the aluminum is not exposed to the elements, it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. For this reason, we recommend the purchase of an anodized finish on all of our flagpoles.

    Please Note: Anodized poles take maximum time to ship because they are made to order.

    Our commercial poles ship by truck and our shipping calculator is not able to accurately calculate the cost. Click for more information about buying a commercial grade flagpole.

  • Additional Information
    Clearance Non-Clearance
    Color Black Anodized, Bronze Anodized, Clear Anodized, Satin
    Country Of Origin United States
    Product Type Flagpoles
    Season Everyday
    Butt Diameter 5in
    Exposed Height 30ft
    Flagged Windspeed 91 MPH
    Overall Height 33ft
    Size 30ft
    Top Diameter 3in
    Unflagged Windspeed 119 mph
    Wall Thickness .156in
    Features Internal Halyard, Revolving Truck
    Type Aluminum, Commercial, Traditional
    Brand Eder

The 30 Foot Deluxe IH Series is an aluminum ground-set, internal halyard flagpole. It contains a winch mounted inside of the of the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retaining ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals. This flagpole will be shipped with 2 sections and fitted with a self-aligning sleeve which requires no field welding.

Included Standard Accessories:

  • Cast aluminum revolving truck with enclosed stainless steel bearings and raceway
  • Stainless steel cable assembly
  • Deluxe flag arrangement
  • Retainer ring and counterweight
  • M-Winch system
  • Spun aluminum flash collar
  • Galvanized steel foundation sleeve

Available in standard satin finish, however we also offer clear, bronze and black anodized finish at additional cost. While all of our aluminum flagpoles require little maintenance to retain their natural shine, our anodized flagpoles offer an even simpler solution. Our satin brushed finished flagpoles will generally keep clean with the rainfall in most areas, however; because the exterior of the flagpole is aluminum, it will continue to oxidize throughout its lifetime. Special cleaning agents may be required to remove the discoloration caused by this process of oxidation. Our anodized flagpoles do not encounter this problem. The process of anodization actually creates a barrier on the external surface of the aluminum flagpole, thus eliminating the oxidation process. Because the aluminum is not exposed to the elements, it cannot oxidize. The anodized finishes allow you to clean your flagpole with simple soap and water. For this reason, we recommend the purchase of an anodized finish on all of our flagpoles.

Please Note: Anodized poles take maximum time to ship because they are made to order.

Our commercial poles ship by truck and our shipping calculator is not able to accurately calculate the cost. Click for more information about buying a commercial grade flagpole.

Clearance Non-Clearance
Color Black Anodized, Bronze Anodized, Clear Anodized, Satin
Country Of Origin United States
Product Type Flagpoles
Season Everyday
Butt Diameter 5in
Exposed Height 30ft
Flagged Windspeed 91 MPH
Overall Height 33ft
Size 30ft
Top Diameter 3in
Unflagged Windspeed 119 mph
Wall Thickness .156in
Features Internal Halyard, Revolving Truck
Type Aluminum, Commercial, Traditional
Brand Eder