This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
The Enervex (formerly Exhausto) ADC100 speed control offers the perfect solution to draft problems in gas-fired heating appliances as well as gas fireplaces. It is integrated with a fan proving switch which monitors and creates proper draft in the chimney, while simplifying the operation of the fireplace and the fan. This control assures safe operation of gas-fired appliances and fireplaces.
The ADC100 control is used to set the speed of the chimney fan that creates the mechanical draft in the chimney system. It provides a proper and accurate draft at the outlet of the heating appliance and features an integrated safety function that prevents the heating appliance from operating in case of a mechanical or electrical failure.
The ADC100 control constantly senses the draft in the chimney. In the case of inadequate draft, it will increase the fan speed gradually until the draft set-point is satisfied. If it reaches maximum capacity, and the draft set-point is still not satisfied, the appliance will be shut down after a period of 12 seconds.
The ADC100 control also features pre-purge and post-purge functions. The pre-purge function ensures that draft in the chimney has been established before the heating appliance is turned on. The post-purge function operates the chimney fan up to 3 minutes after the appliance is shut down. This allows for evacuation of flue gas products still in the chimney.
- The perfect solution to draft problems in gas-fired heating appliances and fireplaces
- Provides a proper and accurate draft at the outlet of the heating appliance
- integrated with a fan proving switch which monitors and creates proper draft in the chimney
- Integrated safety function prevents heating appliance from operating in case of a mechanical or electrical failure
- features pre-purge and post-purge functions for safe operation of gas appliances and fireplaces
View Specs View Instruction Manual
Specifications:- Power supply V 1x120VAC
- Amperage A 6.3
- Operating temperature -4? to 122? F
- Control signal mA max. 10
- Control relay Max. 120 VAC / 8A
- Output VAC 10-120 VDC 0-10
- Dimensions 7.17" Long x 7.09 Wide x 4.37 Deep
- Chimney Probe Dimensions: 4.25" x 3.50
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Chimney Caps HR-mail-only true Left Overlay Image Made in the USA.png Brand Enervex
The Enervex (formerly Exhausto) ADC100 speed control offers the perfect solution to draft problems in gas-fired heating appliances as well as gas fireplaces. It is integrated with a fan proving switch which monitors and creates proper draft in the chimney, while simplifying the operation of the fireplace and the fan. This control assures safe operation of gas-fired appliances and fireplaces.
The ADC100 control is used to set the speed of the chimney fan that creates the mechanical draft in the chimney system. It provides a proper and accurate draft at the outlet of the heating appliance and features an integrated safety function that prevents the heating appliance from operating in case of a mechanical or electrical failure.
The ADC100 control constantly senses the draft in the chimney. In the case of inadequate draft, it will increase the fan speed gradually until the draft set-point is satisfied. If it reaches maximum capacity, and the draft set-point is still not satisfied, the appliance will be shut down after a period of 12 seconds.
The ADC100 control also features pre-purge and post-purge functions. The pre-purge function ensures that draft in the chimney has been established before the heating appliance is turned on. The post-purge function operates the chimney fan up to 3 minutes after the appliance is shut down. This allows for evacuation of flue gas products still in the chimney.
- The perfect solution to draft problems in gas-fired heating appliances and fireplaces
- Provides a proper and accurate draft at the outlet of the heating appliance
- integrated with a fan proving switch which monitors and creates proper draft in the chimney
- Integrated safety function prevents heating appliance from operating in case of a mechanical or electrical failure
- features pre-purge and post-purge functions for safe operation of gas appliances and fireplaces
View Specs View Instruction ManualSpecifications:
- Power supply V 1x120VAC
- Amperage A 6.3
- Operating temperature -4? to 122? F
- Control signal mA max. 10
- Control relay Max. 120 VAC / 8A
- Output VAC 10-120 VDC 0-10
- Dimensions 7.17" Long x 7.09 Wide x 4.37 Deep
- Chimney Probe Dimensions: 4.25" x 3.50
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Season | Everyday |
| Product Type | Chimney Caps |
| HR-mail-only | true |
| Left Overlay Image | Made in the USA.png |
| Brand | Enervex |
