Stainless Steel Ash Scoop

The Ash Scoop is the ultimate ash removal tool for your wood burning stove, fireplace or insert. The Ash Scoop is totally ash-less and combines the shovel and bucket into a faster safer cleaning process with no mess. This Ash Scoop does not require filters or electricity and never clogs. Also, no extra tools are required.

This great wood burning accessory has fully welded seams for durability, and a smooth bevel fluted handle for ease and comfort. The 10" wide pivoting handle makes carrying comfortable and the 6"high x 8"wide x 22" long ash container holds a large amount of ash to help reduce trips. The ash container is made of 304 grade Stainless steel and has a hinged lid to help eliminate airborne ash particles. The beveled opening allows the capture of the maximum amount of ash, and it is Made in the USA.

Use for stoves, inserts and fireplaces that are more than 16 Inches deep.

Additional Information:

Step by Step Instructions:

• Use the Ash Scoop to scoop ashes from your stove
• Close the lid prior to pulling the Ash Scoop from the stove. (This prevents any ash going into the air)
• Transport the Ash Scoop to your disposal area/container and dump.

Instructions

• Always wear proper protective clothing and gloves.
• When you are ready to clean out the ashes in your stove (recommended waiting time is 10-12 hours after the last load, but while the stove is still warm), create a pile of the ashes in the center of the stove/insert.
• For those of you that want to continue heating use the EMBER EXTRACTOR to reclaim any hot coals to continue burning without relighting.
• Grab the pivoting handle with one hand and the fixed handle with the other and lay the bottom edge of the ASH SCOOP on the opening of the stove/insert with the hinged lid on top of the ASH SCOOP and open the lid.
• Using both handles, push the ASH SCOOP to the back of the stove until, it meets the back wall. Repeat this scooping motion until all the desired ashes are gathered (Hint: After the first scoop, tilt the ASH SCOOP down and lightly shake making sure not to let the opening of the ASH SCOOP leave the stove/insert. This will move the ashes to the bottom of the ASH SCOOP, making it easier to collect the rest of the ashes in the stove).
• Once you have all the ashes, pull the ASH SCOOP back toward you once again, DO NOT LET THE OPENING OF THE ASH SCOOP LEAVE THE OPENING OF THE STOVE!!! Continue to hold the fixed handle and with the hand that was holding the pivoting handle close the lid. Re-grasp the pivoting handle and pull the ASH SCOOP from the stove.
• The ASH SCOOP box may get extremely hot during transport. Never touch the container part of the ASH SCOOP while in use.
• Release the fixed handle and carry (using the pivoting handle) the ASH SCOOP to your disposal area. THE USER OF THE ASH SCOOP IS RESPONSIBLE FOR PROPERLY DISPOSING OF ASHES IN A SAFE AND ENVIRONMENTALLY FRIENDLY MANNER.
• Once you are ready to empty the ASH SCOOP, grab the fixed handle and lift the bottom toward you, aiming the opening at your desired disposal area WARNING-SOME HOT ASHES AND COALS MAY STILL EXIST CAUSING A POTENTIAL FIRE HAZARD.
• Once emptied, release the fixed handle and the ASH SCOOP will return to the carry position. Lid will automatically open and close during dumping. Box may remain hot for a short period after dumping.

• No tools required
• Fixed handle simply screws into bottom of box
• 3 ¾" Fluted Black Fixed Handle
• 3/16" x 10" carrying pivot handle
• Weight 7.78 lbs
• 22 gauge 304 Stainless Steel box and lid
• Full welded seams
• Made in the USA
• Holds up to 920 cubic inches of Ash
• 28 ¾" overall assembled length