This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
The Tjernlund Duct Airstat is used to automatically activate Duct Booster fans by sensing positive pressure in a forced air heating and/or cooling system. The Single pole, single throw, snap-acting switch is activated by a diaphragm with a factory installed sampling probe inserted directly into the duct plenum.
The Duct Airstat can be used to initiate such auxiliary devices as: Duct Boosters, Electronic Air Cleaners, Electrical Duct Heaters, and Humidifiers. The electrical contacts of the switch are closed upon sensing positive air pressure generated by the blower.
Additional Information:
Important: All wiring must comply with applicable codes and ordinances. The Duct Airstat must be mounted in a vertical position. Installations in larger ducts or dead spots" in duct work may not create enough positive pressure impact" to activate the Duct Airstat.
Specifications:- Dimensions: 5 1/2" Wide x 3" High
- Electrical Rating: 278 VA Pilot Duty at 24 Volts AC, 300 VA Pilot Duty at 115 to 277 Volts AC, 15 AMPS Non-Inductive to 277 Volts AC
- Maximum Pressure: 1/2 PSI
- Operating Temperature Range: -40 to 1900 F
- Includes: A fixed fan-on" setpoint, Integral pressure probe, Sealing gasket, and Mounting hardware
- Compatible with the 5TJ-SC-1 Speed Control
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Stove/Furnace Accessories Product Type Fans & Blowers Left Overlay Image Made in the USA.png Brand Tjernlund
The Tjernlund Duct Airstat is used to automatically activate Duct Booster fans by sensing positive pressure in a forced air heating and/or cooling system. The Single pole, single throw, snap-acting switch is activated by a diaphragm with a factory installed sampling probe inserted directly into the duct plenum.
The Duct Airstat can be used to initiate such auxiliary devices as: Duct Boosters, Electronic Air Cleaners, Electrical Duct Heaters, and Humidifiers. The electrical contacts of the switch are closed upon sensing positive air pressure generated by the blower.
Additional Information:
Important: All wiring must comply with applicable codes and ordinances. The Duct Airstat must be mounted in a vertical position. Installations in larger ducts or dead spots" in duct work may not create enough positive pressure impact" to activate the Duct Airstat.
Specifications:
- Dimensions: 5 1/2" Wide x 3" High
- Electrical Rating: 278 VA Pilot Duty at 24 Volts AC, 300 VA Pilot Duty at 115 to 277 Volts AC, 15 AMPS Non-Inductive to 277 Volts AC
- Maximum Pressure: 1/2 PSI
- Operating Temperature Range: -40 to 1900 F
- Includes: A fixed fan-on" setpoint, Integral pressure probe, Sealing gasket, and Mounting hardware
- Compatible with the 5TJ-SC-1 Speed Control
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Season | Everyday |
| Product Type | Stove/Furnace Accessories |
| Product Type | Fans & Blowers |
| Left Overlay Image | Made in the USA.png |
| Brand | Tjernlund |
