This icon indicates that the pole is suitable
for residential locations.
This icon indicates that the pole is suitable
to install outside of public buildings like schools, libraries, small offic
municipal buildings, etc.
This icon indicates that the pole is suitable to
be installed outside of shopping centers and stores.
This icon indicates that the pole is suitable to
be installed in recreational locations like parks and playgrounds and camping sites.
This icon indicates that the pole is suitable to
be installed outside high-rise office buildings and large city locations.
This icon indicates that the pole is suitable to be installed
outside of a factory or industrial location.
This icon indicates that the pole is suitable to be
installed in a coastal or beach location.
This icon indicates that the pole is able to withstand
mild to moderately windy conditions.
This icon indicates that the pole is able to
withstand heavy winds and stormy conditions.
This icon indicates that the pole is one of our best sellers.
-
Details
The Duct Booster Fan is designed to increase the flow of heated air in warm air heating systems, or cooled air in central air conditioning systems. It's size and design allows it to be used in branch ducts serving individual rooms, or the main supply or "Trunk Line" duct.
- Solve Air Delivery Problems: Duct Booster Fans can be installed in existing supply ducts to boost air flow into hard-to-heat or cool rooms.
- Solve Exhaust Problems: Duct Fans are the efficient, economical way to exhaust unwanted heat, humidity, odors or other air-borne contaminates.
- The Duct Booster can be mounted in sheet metal or flexible duct.
Additional Information:
Important: The Duct Booster is used as a means of increasing air flow through duct work or as an exhaust fan to vent non-combustible air or fumes from enclosed spaces. Do not install the Duct Booster where temperature of air within the duct exceeds 150°F.This temperature would rarely be found on a forced air system but would exist close to the furnace on a gravity warm air system. Locating the fan near the end of the duct will provide the most efficient performance.
- Duct Booster fans are not suitable for exhausting flue gases or in environments where explosion-proof motors are required.
- The Duct Booster cannot be wired into the low (heating) and high (air conditioning/fan on) contacts of the blower relay. Doing so will short out the blower.
Specifications:- Dimensions: 15 3/4" High x 12" Diameter
- Blower: 875 CFM
- Motor: 115 Volts ~ 60 Hz
-
Additional Information
Clearance Non-Clearance Country Of Origin United States Season Everyday Product Type Stove/Furnace Accessories Product Type Fans & Blowers HR-mail-only true Left Overlay Image Made in the USA.png Brand Tjernlund
The Duct Booster Fan is designed to increase the flow of heated air in warm air heating systems, or cooled air in central air conditioning systems. It's size and design allows it to be used in branch ducts serving individual rooms, or the main supply or "Trunk Line" duct.
- Solve Air Delivery Problems: Duct Booster Fans can be installed in existing supply ducts to boost air flow into hard-to-heat or cool rooms.
- Solve Exhaust Problems: Duct Fans are the efficient, economical way to exhaust unwanted heat, humidity, odors or other air-borne contaminates.
- The Duct Booster can be mounted in sheet metal or flexible duct.
Additional Information:
Important: The Duct Booster is used as a means of increasing air flow through duct work or as an exhaust fan to vent non-combustible air or fumes from enclosed spaces. Do not install the Duct Booster where temperature of air within the duct exceeds 150°F.This temperature would rarely be found on a forced air system but would exist close to the furnace on a gravity warm air system. Locating the fan near the end of the duct will provide the most efficient performance.
- Duct Booster fans are not suitable for exhausting flue gases or in environments where explosion-proof motors are required.
- The Duct Booster cannot be wired into the low (heating) and high (air conditioning/fan on) contacts of the blower relay. Doing so will short out the blower.
Specifications:
- Dimensions: 15 3/4" High x 12" Diameter
- Blower: 875 CFM
- Motor: 115 Volts ~ 60 Hz
| Clearance | Non-Clearance |
|---|---|
| Country Of Origin | United States |
| Season | Everyday |
| Product Type | Stove/Furnace Accessories |
| Product Type | Fans & Blowers |
| HR-mail-only | true |
| Left Overlay Image | Made in the USA.png |
| Brand | Tjernlund |
